DC Voltage
---------------------------------------
10ppm Accuracy, 5ppm Stability
---------------------------------------
Standard |
Features
Accuracy: 10ppm
Traceable to U.S. N.I.S.T.
Stability: 5ppm
DC Outputs: 0V,-30mV,-60mV,
-600mV,-6.0V+6.2V,+0.2V
All Outputs Floating
Ripple and Noise: <25µV p-p
Designed to Calibrate: Kaye Instrument’s
DIGISTRIP 4®, DIGI-LINK 4®, DIGISTRIP
4 PLUS,TruTemp™ Data Logging Systems and VALIDATOR™
Options
Extended 1 Year Warranty: Part
No. EWK11.
Related Models
Model
511 - ±10ppm 100nVdc to 10Vdc
|
|
DESCRIPTION
The EDC Model K-11 DC Voltage Standard
provides DC output voltages of 0V,-30mV, -60mV, -600mV, -6.0V +6.2V, +0.2V with
standards accuracy of ±10ppm valid for 1 year. The output buffer will drive 10mA
and all outputs are floating with respect to earth ground. The Model K-11
has also been designed for short-circuit protection with automatic recovery.
APPLICATIONS
The K-11 can be used as a calibrator
with a standards accuracy of ±10ppm. It has been specifically designed to
calibrate Kaye Instrument’s DIGISTRIP 4®, DIGI-LINK 4®, DIGISTRIP 4 PLUS, and TruTemp™
Data Logging Systems.
SPECIFICATIONS
OUTPUT
DC Outputs (Buffered): 0V,-30mV,-60mV,-600mV,-6.0V
+6.2V, +0.2V output buffer will drive 10mA. All outputs are floating with respect
to earth ground.
Accuracy (Valid for 1 Year): ±10ppm of selected value or 2µV, whichever
is greater.
Calibration Temperature: 23ºC ±1ºC.
Temperature Coefficient (0ºC to 40ºC): 2ppm/ºC.
Stability (Valid for 1 Year): 5ppm.
Ripple and Noise: 25µVp-p; bandwidth, 0.1Hz to 100kHz.
GENERAL
Power Requirements: Power is supplied via a wall mounted transformer.
This reduces heat and electrical noise to a minimum. Therefore, please specify the
line (mains) power, 117V ac or 230V ac, when ordering.
Protection: Short-circuit protection. Automatic recovery.
Environment:
Operating Temperature: 0ºC to 40ºC.
Storage Temperature: –20ºC to +50ºC.
MISCELLANEOUS
Dimensions: 3.5" (8.9cm) high, 8.75" (22.2cm) wide, 14.5" (36.8cm)
deep. Supplied with tilt bale, feet and carry handle.
Weight: 6 lbs. (2.72kg) net, 11 lbs. (5.0kg) shipping.
Warranty: ONE YEAR, including accuracy and stability.
Certificate of Compliance and Traceability: Included with each
new instrument and is traceable to the U.S. National Institute of Standards and
Technology (N.I.S.T.).
OPTIONS
Extended 1 Year Warranty: Part
No. EWK11.
Specifications and prices are subject to change without notice.
DIGISTRIP 4, DIGI-LINK 4, DIGI-LINK 4 PLUS and DIGISTRIP
4 PLUS are registered patents by KAYE INSTRUMENTS, Bedford Massachusetts. TruTemp
and VALIDATOR are Trade Marks of KAYE INSTRUMENTS COMPANY, Bedford Massachusetts.
Copyright ©
February 23, 2006 Krohn-Hite Corporation.
All rights reserved.
15 Jonathan Drive, Unit 4, Brockton, MA 02301-5566 U.S.A.
Tel: (508) 580-1660; Fax: (508) 583-8989; info@krohn-hite.com
|
